|
"VIRAJ" Make Portable De-watering Submersible Pump Design in single stage centrifugal closed coupled vertical ( mono-block type) construction. This series are available with variable design of impeller as per customer's application . And motor design in pressure resistance design with internal sealed , double mechanical shaft seal, as well as separate sealing Chamber. The Sealing Chamber is filled with oil . Motor sealing at the shaft double wear resistance mechanical shaft seal independent of direction on rotation entirely made of Tungsten or Silicon Carbide as close unit, Both seal cooled and lubricated by oil. The motor is equipped with two maintenance free ball bearing. The upper and lower bearing are filled with high quality grease.The motor is suitable for continuous operation ( S-1) under full load in immersed and completely emerged condition. This series design with jacketed type with top discharge and bottom suction .
TECHNICAL DATA
PRODUCT RANGE
| RANGE |
0.75 HP TO 3.0 HP ( SINGLE /THREE PHASE) |
| HEAD |
UP TO 25 MTR. |
| DISCHARGE |
UP TO 84 M3/HR. |
| SOLID SIZE |
MAX. UP TO 10 MM |
| SPEED |
2900 RPM, |
MATERIAL OF CONSTRUCTION
| TOP COVER, BRG. HSG, OIL CHAMBER , BASE , STATOR BODY |
CAST IRON/MILD STEEL/STAINLESS STEEL/ ALUMINUM |
| OUTER JACKET |
STAINLESS STEEL |
| SHAFT |
STAINLESS STEEL 410 /431 |
| IMPELLER |
CAST IRON/STAINLESS STEEL/BRONZE |
| MECHANICAL SEAL ( TWIN SEAL -TANDEM ASSEMBLY) |
T.C./T.C. OR SIC/SIC ( IST ) AND CABRON/S.S.( IIND) |
| PAINT |
PRIMER WITH EPOXY PAIN |
| HARDWARE |
STAINLESS STEEL |
APPLICATION
| * CONSTRUCTION SITE /FIRE FIGHTING |
* TANK CLEANING/HOTEL/HOSPITAL |
| * TRANCHES / RAIN WATER |
* FLOODED CLEAR WATER /RAW WATER |
| * MINE RAW WATER LIFTING |
* OPEN SUMP / POND / TUNNEL / AQUACULTURE / FOUNTAIN |
| * POWER PLANT AND STEEL PLANT |
* CHEMICAL INDUSTRIES/ MUNICIPAL CORPORATION /PUBLIC UTILITY WORK |
|
